product specification revision: ecr/ecninformation: title: PS-89675-1400 tnc (50 and 75 ohm) sheetno. a5 ecno: urf2012-0021 1 of 3 date: 1998/01/29 documentnumber: created/revisedby: checkedby: approvedby: ps - 89675 - 1 40 edc/j. wiener dhg gmh template filename: product_spec[size_a](v.1).doc 1.0 scope thisproductspecificationcoverstncconnectors 2.0 product description 2.1 product name tnc 3.0 applicable documents and specifications milstd348a 4.0 ratings 4.1 voltage 500vrmsatsealevel 125vrmsat70,000feet 4.2 temperature rating:65cto+165c 65cto+95c(commercial) 4.3 frequency rating 50ohm: dcto11ghzmaximum dcto4ghzoptimum dcto2ghzcommercial 75ohm:dcto4ghzmaximum dcto2ghzoptimum dcto1ghzcommercial 4.4 nominal impedance 50or75ohms(seesalesdrawing)
product specification revision: ecr/ecninformation: title: PS-89675-1400 tnc (50 and 75 ohm) sheetno. a5 ecno: urf2012-0021 2 of 3 date: 1998/01/29 documentnumber: created/revisedby: checkedby: approvedby: ps - 89675 - 1 40 edc/j. wiener dhg gmh template filename: product_spec[size_a](v.1).doc 5.0 performance 5.1 electrical requirements item description test condition requirement 1 insulation resistance milprf39012,paragraph3.11 5000 megohms 2 dielectric withstanding voltage milprf39012,paragraph3.17 1500vrms 3 rf high potential withstanding milprf39012,paragraph3.23 1000vrms@5mhzto7.5 mhz 4 contact resistance milprf39012,paragraph3.16 centercontact outercontact 1.5milliohmsmax 1.0milliohmsmax 5 voltage standing wave ratio milprf39012,paragraph3.14 1.22typ (optimumfrequencyof operation) 6 rf leakage milprf39012,paragraph3.26 60dbmindcto3g hz 7 rf insertion loss milprf39012,paragraph3.27 .09xf(ghz)db 5.2 mechanical requirements item description test condition requirement 8 material milprf39012,paragraph3.3 seesalesdrawing 9 finish milprf39012,paragraph3.3.1 seesalesdrawing 10 design milprf39012,paragraph3.4 seesalesdrawing 11 recommended mating torque milprf39012 46inlbs(.49.69nm) 12 force to engage axialforce n/a 13 force to disengage axialforce n/a 14 coupling retention axialforce 100lbs(444.82n) 15 coupling proof torque milprf39012,paragraph3.6 15inlb(1.69nm)
product specification revision: ecr/ecninformation: title: PS-89675-1400 tnc (50 and 75 ohm) sheetno. a5 ecno: urf2012-0021 3 of 3 date: 1998/01/29 documentnumber: created/revisedby: checkedby: approvedby: ps - 89675 - 1 40 edc/j. wiener dhg gmh template filename: product_spec[size_a](v.1).doc 5.2 mechanical requirements (continued) item description test condition requirement 16 mating characteristics milprf39012,paragraph3.7 fig.3131and3132 17 connector durability milprf39012,paragraph3.15 500cycles 18 center contact retention milprf39012,paragraph3.12 axialforce 6lbs(captivatedcontacts) 19 hermetic seal milprf39012,paragraph3.9 heliumtracergas n/a 5.3 environmental requirements item description test condition requirement 20 vibration milprf39012,paragraph3.18 permilstd202,method204 testconditionb 21 shock milprf39012,paragraph3.19 permilstd202,method213 testconditioni 22 shock (thermal) milprf39012,paragraph3.2 permilstd202,method107 testconditionb(85c) 23 corrosion (salt spray) milprf39012,paragraph3.13 permilstd202,method101 testconditionb 24 moisture resistance milprf39012,paragraph3.21 permilstd202,method106 dwv1500vrms(afterdrying)
|
